products

33 items

Page
per page
Set Descending Direction
  1. ADPF30-0070
    $64.50
    • Special guide-hole design developed for drilling micro -diameter holes.
    • Chisel edge width is designed smaller, and width of the guide-hole base is narrower than the core thickness of the secondary operation drill.
    • positioning accuracy.
    Learn More
  2. ADPF30-0075
    $64.50
    • Special guide-hole design developed for drilling micro -diameter holes.
    • Chisel edge width is designed smaller, and width of the guide-hole base is narrower than the core thickness of the secondary operation drill.
    • positioning accuracy.
    Learn More
  3. ADPF30-0080
    $64.50
    • Special guide-hole design developed for drilling micro -diameter holes.
    • Chisel edge width is designed smaller, and width of the guide-hole base is narrower than the core thickness of the secondary operation drill.
    • positioning accuracy.
    Learn More
  4. ADPF30-0085
    $64.50
    • Special guide-hole design developed for drilling micro -diameter holes.
    • Chisel edge width is designed smaller, and width of the guide-hole base is narrower than the core thickness of the secondary operation drill.
    • positioning accuracy.
    Learn More
  5. ADPN30-0070
    $64.50
    • Special guide-hole design developed for drilling micro -diameter holes.
    • Chisel edge width is designed smaller, and width of the guide-hole base is narrower than the core thickness of the secondary operation drill.
    • positioning accuracy.
    Learn More
  6. ADPN30-0075
    $64.50
    • Special guide-hole design developed for drilling micro -diameter holes.
    • Chisel edge width is designed smaller, and width of the guide-hole base is narrower than the core thickness of the secondary operation drill.
    • positioning accuracy.
    Learn More
  7. ADPN30-0080
    $64.50
    • Special guide-hole design developed for drilling micro -diameter holes.
    • Chisel edge width is designed smaller, and width of the guide-hole base is narrower than the core thickness of the secondary operation drill.
    • positioning accuracy.
    Learn More
  8. ADPN30-0085
    $64.50
    • Special guide-hole design developed for drilling micro -diameter holes.
    • Chisel edge width is designed smaller, and width of the guide-hole base is narrower than the core thickness of the secondary operation drill.
    • positioning accuracy.
    Learn More
  9. ADR-0010
    $65.10
    • Micro precision drilling from micro holes (smallest diameter offering: φ 0.02mm=0.0008”).
    • GET RID OF reamer after all.
    • Suitable for a wide range of materials including steels, non-ferrous and resin.
    Learn More
  10. ADR-0011
    $60.30
    • Micro precision drilling from micro holes (smallest diameter offering: φ 0.02mm=0.0008”).
    • GET RID OF reamer after all.
    • Suitable for a wide range of materials including steels, non-ferrous and resin.
    Learn More
  11. ADR-SP-00095
    $89.30
    • Micro precision drilling from micro long holes (smallest diameter offering: φ0.035mm=0.00137795275”).
    • The tolerance of run-out is ONLY within 2μm.
    • The lip height difference is ONLY within 2μm.
    • GET RID OF reamer after all.
    • Suitable for a wide range of materials including steels, non-ferrous and resin.
    Learn More
  12. ADR-SP-00105
    $77.50
    • Micro precision drilling from micro long holes (smallest diameter offering: φ0.035mm=0.00137795275”).
    • The tolerance of run-out is ONLY within 2μm.
    • The lip height difference is ONLY within 2μm.
    • GET RID OF reamer after all.
    • Suitable for a wide range of materials including steels, non-ferrous and resin.
    Learn More
  13. ADR-SUS-0012
    $70.80
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Suitable for a wide range of materials including stainless steel, Inconel, Hasteroy, and Kovar.
    • Originally developed cutting edge form for chipping and wear resistance.
    • Thinning for decreasing thrust load, reducing work hardening and welding.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance. Lip height under 3μm(0.00012”).
    • Precision shank tolerance of 5μm(+0/-0.0002”).
    Learn More
  14. ADR-SV-0010
    $71.80
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More
  15. ADR-SV-0011
    $68.30
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More
  16. ADRL-0006
    $148.00
    • Micro precision drilling from micro long holes (smallest diameter offering: φ 0.03mm=0.0012”).
    • GET RID OF reamer after all.
    • Suitable for a wide range of materials including steels, non-ferrous and resin.
    Learn More
  17. ADRL-SV-0006
    $162.70
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More
  18. ADRS-0022
    $53.60
    • Micro precision drilling from micro stub holes.
    • GET RID OF reamer after all.
    • Suitable for a wide range of materials including steels, non-ferrous and resin.
    Learn More
  19. ADRS-0023
    $53.60
    • Micro precision drilling from micro stub holes.
    • GET RID OF reamer after all.
    • Suitable for a wide range of materials including steels, non-ferrous and resin.
    Learn More
  20. ADRS-0024
    $53.60
    • Micro precision drilling from micro stub holes.
    • GET RID OF reamer after all.
    • Suitable for a wide range of materials including steels, non-ferrous and resin.
    Learn More
  21. ADRS-SV-0022
    $61.90
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More
  22. ADRS-SV-0023
    $61.90
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More
  23. ADRS-SV-0024
    $61.90
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More
  24. ADRSL-0008
    $105.00
    • Micro precision drilling from micro holes (smallest diameter offering: φ 0.03mm=0.0012”).
    • GET RID OF reamer after all.
    • Suitable for a wide range of materials including steels, non-ferrous and resin.
    Learn More
  25. ADRSL-0009
    $92.50
    • Micro precision drilling from micro holes (smallest diameter offering: φ 0.03mm=0.0012”).
    • GET RID OF reamer after all.
    • Suitable for a wide range of materials including steels, non-ferrous and resin.
    Learn More

33 items

Page
per page
Set Descending Direction