products

48 items

Page
per page
Set Descending Direction
  1. ADPF30-0130
    $64.50
    • Special guide-hole design developed for drilling micro -diameter holes.
    • Chisel edge width is designed smaller, and width of the guide-hole base is narrower than the core thickness of the secondary operation drill.
    • positioning accuracy.
    Learn More
  2. ADPF30-0140
    $64.50
    • Special guide-hole design developed for drilling micro -diameter holes.
    • Chisel edge width is designed smaller, and width of the guide-hole base is narrower than the core thickness of the secondary operation drill.
    • positioning accuracy.
    Learn More
  3. ADPF30-0150
    $64.50
    • Special guide-hole design developed for drilling micro -diameter holes.
    • Chisel edge width is designed smaller, and width of the guide-hole base is narrower than the core thickness of the secondary operation drill.
    • positioning accuracy.
    Learn More
  4. ADPF30-0160
    $64.50
    • Special guide-hole design developed for drilling micro -diameter holes.
    • Chisel edge width is designed smaller, and width of the guide-hole base is narrower than the core thickness of the secondary operation drill.
    • positioning accuracy.
    Learn More
  5. ADPF30-0170
    $64.50
    • Special guide-hole design developed for drilling micro -diameter holes.
    • Chisel edge width is designed smaller, and width of the guide-hole base is narrower than the core thickness of the secondary operation drill.
    • positioning accuracy.
    Learn More
  6. ADPN30-0130
    $64.50
    • Special guide-hole design developed for drilling micro -diameter holes.
    • Chisel edge width is designed smaller, and width of the guide-hole base is narrower than the core thickness of the secondary operation drill.
    • positioning accuracy.
    Learn More
  7. ADPN30-0140
    $64.50
    • Special guide-hole design developed for drilling micro -diameter holes.
    • Chisel edge width is designed smaller, and width of the guide-hole base is narrower than the core thickness of the secondary operation drill.
    • positioning accuracy.
    Learn More
  8. ADPN30-0150
    $64.50
    • Special guide-hole design developed for drilling micro -diameter holes.
    • Chisel edge width is designed smaller, and width of the guide-hole base is narrower than the core thickness of the secondary operation drill.
    • positioning accuracy.
    Learn More
  9. ADPN30-0160
    $64.50
    • Special guide-hole design developed for drilling micro -diameter holes.
    • Chisel edge width is designed smaller, and width of the guide-hole base is narrower than the core thickness of the secondary operation drill.
    • positioning accuracy.
    Learn More
  10. ADPN30-0170
    $64.50
    • Special guide-hole design developed for drilling micro -diameter holes.
    • Chisel edge width is designed smaller, and width of the guide-hole base is narrower than the core thickness of the secondary operation drill.
    • positioning accuracy.
    Learn More
  11. ADRS-SV-0040
    $46.90
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More
  12. ADRS-SV-0041
    $51.40
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More
  13. ADRS-SV-0042
    $51.40
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More
  14. ADRS-SV-0043
    $51.40
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More
  15. ADRS-SV-0044
    $51.40
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More
  16. ADRS-SV-0045
    $51.40
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More
  17. ADRS-SV-0046
    $51.40
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More
  18. ADRS-SV-0047
    $51.40
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More
  19. ADRS-SV-0048
    $51.40
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More
  20. ADRS-SV-0049
    $51.40
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More
  21. ADRS-SV-0050
    $46.90
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More
  22. ADRS-SV-0051
    $51.40
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More
  23. ADRS-SV-0052
    $51.40
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More
  24. ADRS-SV-0053
    $51.40
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More
  25. ADRS-SV-0054
    $51.40
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More

48 items

Page
per page
Set Descending Direction