ADRL-DLC
- • DLC coated long length micro drills with diameters from 0.1 - 3 mm (0.0039" - 0.118")
- • Provide tight tolerance of +0/-0.005 mm
- • Wide chip pocket enhances chip evacuation
- • Prevent welding or built-up edge, tool wear and ensure long tool life
- • High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
-
ADRL-DLC-0035$97.40- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0036$97.40- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0037$97.40- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0038$97.40- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0039$97.40- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0040$97.40- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0041$97.40- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0042$97.40- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0043$97.40- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0044$97.40- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0045$97.40- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0046$97.40- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0047$97.40- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0048$97.40- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0049$97.40- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0050$97.40- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0051$100.20- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0052$100.20- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0053$100.20- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0054$100.20- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0055$100.20- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0056$100.20- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0057$100.20- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0058$100.20- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0059$100.20- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum