3mm Shank Drills
-
ADRL-DLC-0054$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0059$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0064$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0070$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0075$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0080$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0086$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0091$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0096$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-SUS-0084$68.60- FCS coated long length micro drills
- Thicker web improves tool stability
- High performance with hard-to-cut materials, including nickel alloys and hardened steels up to 50 HRC
ADRL-SUS-0089$68.60- FCS coated long length micro drills
- Thicker web improves tool stability
- High performance with hard-to-cut materials, including nickel alloys and hardened steels up to 50 HRC
ADRL-SUS-0094$68.60- FCS coated long length micro drills
- Thicker web improves tool stability
- High performance with hard-to-cut materials, including nickel alloys and hardened steels up to 50 HRC
ADRL-SUS-0100$62.50- FCS coated long length micro drills
- Thicker web improves tool stability
- High performance with hard-to-cut materials, including nickel alloys and hardened steels up to 50 HRC
ADRL-SUS-0105$66.40- FCS coated long length micro drills
- Thicker web improves tool stability
- High performance with hard-to-cut materials, including nickel alloys and hardened steels up to 50 HRC
ADRL-SUS-0110$62.50- FCS coated long length micro drills
- Thicker web improves tool stability
- High performance with hard-to-cut materials, including nickel alloys and hardened steels up to 50 HRC
ADRL-SUS-0116$66.40- FCS coated long length micro drills
- Thicker web improves tool stability
- High performance with hard-to-cut materials, including nickel alloys and hardened steels up to 50 HRC
ADRL-SUS-0121$66.40- FCS coated long length micro drills
- Thicker web improves tool stability
- High performance with hard-to-cut materials, including nickel alloys and hardened steels up to 50 HRC
ADRL-SUS-0126$66.40- FCS coated long length micro drills
- Thicker web improves tool stability
- High performance with hard-to-cut materials, including nickel alloys and hardened steels up to 50 HRC
ADRL-SUS-0132$66.40- FCS coated long length micro drills
- Thicker web improves tool stability
- High performance with hard-to-cut materials, including nickel alloys and hardened steels up to 50 HRC
ADRL-SUS-0137$66.40- FCS coated long length micro drills
- Thicker web improves tool stability
- High performance with hard-to-cut materials, including nickel alloys and hardened steels up to 50 HRC
ADRL-SUS-0142$66.40- FCS coated long length micro drills
- Thicker web improves tool stability
- High performance with hard-to-cut materials, including nickel alloys and hardened steels up to 50 HRC
ADRL-SUS-0148$66.40- FCS coated long length micro drills
- Thicker web improves tool stability
- High performance with hard-to-cut materials, including nickel alloys and hardened steels up to 50 HRC
ADRL-SUS-0153$66.40- FCS coated long length micro drills
- Thicker web improves tool stability
- High performance with hard-to-cut materials, including nickel alloys and hardened steels up to 50 HRC
ADRL-SUS-0158$66.40- FCS coated long length micro drills
- Thicker web improves tool stability
- High performance with hard-to-cut materials, including nickel alloys and hardened steels up to 50 HRC
ADRL-SV-0037$62.50- FCS coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- High performance with a variety of materials, including steels, stainless steels, titanium alloys, and hardened steels up to 50 HRC