3mm shank drills

36 items

Page
per page
Set Descending Direction
  1. ADR-0004
    $161.70
    • Micro precision drilling from micro holes (smallest diameter offering: φ 0.02mm=0.0008”).
    • GET RID OF reamer after all.
    • Suitable for a wide range of materials including steels, non-ferrous and resin.
    Learn More
  2. ADR-0005
    $136.50
    • Micro precision drilling from micro holes (smallest diameter offering: φ 0.02mm=0.0008”).
    • GET RID OF reamer after all.
    • Suitable for a wide range of materials including steels, non-ferrous and resin.
    Learn More
  3. ADR-0006
    $125.00
    • Micro precision drilling from micro holes (smallest diameter offering: φ 0.02mm=0.0008”).
    • GET RID OF reamer after all.
    • Suitable for a wide range of materials including steels, non-ferrous and resin.
    Learn More
  4. ADR-0007
    $113.60
    • Micro precision drilling from micro holes (smallest diameter offering: φ 0.02mm=0.0008”).
    • GET RID OF reamer after all.
    • Suitable for a wide range of materials including steels, non-ferrous and resin.
    Learn More
  5. ADR-SP-00045
    $173.50
    • Micro precision drilling from micro long holes (smallest diameter offering: φ0.035mm=0.00137795275”).
    • The tolerance of run-out is ONLY within 2μm.
    • The lip height difference is ONLY within 2μm.
    • GET RID OF reamer after all.
    • Suitable for a wide range of materials including steels, non-ferrous and resin.
    Learn More
  6. ADR-SP-00055
    $142.90
    • Micro precision drilling from micro long holes (smallest diameter offering: φ0.035mm=0.00137795275”).
    • The tolerance of run-out is ONLY within 2μm.
    • The lip height difference is ONLY within 2μm.
    • GET RID OF reamer after all.
    • Suitable for a wide range of materials including steels, non-ferrous and resin.
    Learn More
  7. ADR-SP-00065
    $135.30
    • Micro precision drilling from micro long holes (smallest diameter offering: φ0.035mm=0.00137795275”).
    • The tolerance of run-out is ONLY within 2μm.
    • The lip height difference is ONLY within 2μm.
    • GET RID OF reamer after all.
    • Suitable for a wide range of materials including steels, non-ferrous and resin.
    Learn More
  8. ADR-SP-00075
    $123.80
    • Micro precision drilling from micro long holes (smallest diameter offering: φ0.035mm=0.00137795275”).
    • The tolerance of run-out is ONLY within 2μm.
    • The lip height difference is ONLY within 2μm.
    • GET RID OF reamer after all.
    • Suitable for a wide range of materials including steels, non-ferrous and resin.
    Learn More
  9. ADR-SP-00085
    $108.50
    • Micro precision drilling from micro long holes (smallest diameter offering: φ0.035mm=0.00137795275”).
    • The tolerance of run-out is ONLY within 2μm.
    • The lip height difference is ONLY within 2μm.
    • GET RID OF reamer after all.
    • Suitable for a wide range of materials including steels, non-ferrous and resin.
    Learn More
  10. ADR-SV-0004
    $177.70
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More
  11. ADR-SV-0005
    $150.20
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More
  12. ADR-SV-0006
    $137.20
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More
  13. ADR-SV-0007
    $125.00
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More
  14. ADR-SV-0008
    $105.90
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More
  15. ADRL-0004
    $188.50
    • Micro precision drilling from micro long holes (smallest diameter offering: φ 0.03mm=0.0012”).
    • GET RID OF reamer after all.
    • Suitable for a wide range of materials including steels, non-ferrous and resin.
    Learn More
  16. ADRL-0005
    $165.20
    • Micro precision drilling from micro long holes (smallest diameter offering: φ 0.03mm=0.0012”).
    • GET RID OF reamer after all.
    • Suitable for a wide range of materials including steels, non-ferrous and resin.
    Learn More
  17. ADRL-0006
    $148.00
    • Micro precision drilling from micro long holes (smallest diameter offering: φ 0.03mm=0.0012”).
    • GET RID OF reamer after all.
    • Suitable for a wide range of materials including steels, non-ferrous and resin.
    Learn More
  18. ADRL-0007
    $130.80
    • Micro precision drilling from micro long holes (smallest diameter offering: φ 0.03mm=0.0012”).
    • GET RID OF reamer after all.
    • Suitable for a wide range of materials including steels, non-ferrous and resin.
    Learn More
  19. ADRL-0008
    $113.60
    • Micro precision drilling from micro long holes (smallest diameter offering: φ 0.03mm=0.0012”).
    • GET RID OF reamer after all.
    • Suitable for a wide range of materials including steels, non-ferrous and resin.
    Learn More
  20. ADRL-0009
    $107.80
    • Micro precision drilling from micro long holes (smallest diameter offering: φ 0.03mm=0.0012”).
    • GET RID OF reamer after all.
    • Suitable for a wide range of materials including steels, non-ferrous and resin.
    Learn More
  21. ADRL-SV-0005
    $181.50
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More
  22. ADRL-SV-0006
    $162.70
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More
  23. ADRL-SV-0007
    $143.50
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More
  24. ADRL-SV-0008
    $125.00
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More
  25. ADRL-SV-0009
    $118.40
    • Micro precision drilling from micro holes.
    • GET RID OF reamer after all.
    • Specifically developed for multi-hole precision drilling in steels such as carbon steels, alloy steels and hardened steels (303SS, 304SS, 316SS, 403SS, 404SS, 410SS, 420SS,430SS, etc.).
    • Wide chip pocket enables smooth chip evacuation under high speed and feed drilling conditions.
    • The Fine Coating System (FCS) especially developed for micro precision drills keeps edges sharp, allowing excellent cutting performance and wear resistance.
    • Slight honing on drills over φ 1.6mm(=0.06299”) prolong tool life while preventing chipping in high speed and high feed drilling conditions.
    Learn More

36 items

Page
per page
Set Descending Direction