Products
-
ADRL-DLC-0060$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0061$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0062$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0063$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0064$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0065$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0066$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0067$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0068$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0069$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0070$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0071$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0072$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0073$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0074$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0075$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0076$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0077$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0078$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0079$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0080$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0081$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0082$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0083$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum
ADRL-DLC-0084$79.80- DLC coated long length micro drills
- Provide tight tolerance of +0/-0.005 mm
- Wide chip pocket enhances chip evacuation
- Prevent welding or built-up edge, tool wear and ensure long tool life
- High performance with non-ferrous materials, including aluminum and copper alloys and die cast aluminum